Following are the steps changing the Wireless password and/or Network Name:

*Note: For best results, if possible connect the device directly to the router via Ethernet cable.

Click HERE to download the PDF version.

Step 1: Access the modem

  • Open a browser, and navigate to 192.168.1.1
  • A prompt for username and password will appear.
    By default, username is 'admin' and password is 'admin'

    Step 2: Access Wireless Settings

  • Once logged in, Choose 'Interface Setup' on the top menu
  • Choose 'Wireless' under the sub-menu.
  • To view/change the current wireless password

  • Confirm 'Authentication Type' is set to 'WPA-PSK/WPA2-PSK'
  • To change, enter the new password and click 'Save' at the bottom of the page.
  • Note this for your records as this is what you will be using to connect wirelessly on all devices.

    Optional: Change the "Network Name" or SSID

    To change the current "Network Name" also known as the 'SSID'

    Choose 'Interface Setup', then 'Wireless' under the sub-menu.

    In the 'SSID' textbox, erase the current and enter a new one.
    Click 'Save' to apply and re-connect using the new SSID.

    To connect/re-connect to the WiFi Network

    Your device's operating system will vary on how specifically to scan for wireless networks.
    To begin, scan for wireless networks, Your wireless network should be listed as an option, upon choosing the network your device may ask you for a password.
    Enter the password/key for the wireless router and connect.